Fastener & Hardware & Mechanical Parts

Showing 85–96 of 116 results

Solar mounting & aluminum rail standard
Material: Main body: 6063-T6 aluminum alloy; Locking bolt: 304 stainless steel; Tensile strength ≥310MPa, shear strength ≥140MPa
Structure: Rail butt-joint cavity + positioning pin + anti-slip clamping block + stainless steel locking bolt + reinforced rib
Surface Treatments: Anodic oxidation (salt spray resistance ≥800h), wear-resistant and anti-fingerprint, color matching solar aluminum rails
Size: Adapt to rail width 40–80mm, rail thickness 2–4mm, connection length 50–100mm, load-bearing 80–200kg per connector

Solar mounting hardware standard
Material: Stainless steel (304/316), hot-dip galvanized steel; corrosion-resistant for outdoor use
Structure: 3-way adjustable joint + arc roof-fitting base + anti-slip serrations + reinforced rib
Surface Treatments: Hot-dip galvanizing (salt spray ≥1000h), stainless steel passivation, anode oxidation
Size: Adjustment angle ±15° (horizontal/vertical), load-bearing 80–200kg, fits roof slope 15°–60°, base diameter 80–120mm

Solar mounting & aluminum fastener standard
Material: Nut body: 6061-T6 aluminum alloy; Slider: Glass fiber reinforced nylon; Spring: 304 stainless steel; Tensile strength ≥300MPa
Structure: T-shaped slot-fitting slider + internal thread hole + spring preload sheet + anti-slip serrations + guide edge
Surface Treatments: Aluminum part: Anodic oxidation (salt spray resistance ≥800h); Nylon slider: Wear-resistant modification
Size: Thread specification M4–M10, T-slot adaptation width 8–20mm, slider stroke 0–50mm, load-bearing 12–45kg

Solar ground mounting standard
Material: Main profile: 6063-T6 aluminum alloy; Fasteners: 304 stainless steel; Tensile strength ≥310MPa, compressive strength ≥280MPa
Structure: Modular aluminum frame + height-adjustable support leg + triangular reinforcement rib + ground anchor connection plate + PV panel clamping interface
Surface Treatments: Anodic oxidation (salt spray resistance ≥1000h), wear-resistant, anti-UV, and color-stable
Size: Frame height 300–1200mm (adjustable), span 1500–3000mm, load-bearing 200–500kg per square meter, fits 1600–2400mm PV panels

Solar mounting hardware standard
Material: 6063-T6 aluminum alloy; tensile strength ≥310MPa, yield strength ≥276MPa, lightweight (density 2.7g/cm³)
Structure: L-shaped limiting main body + adjustable clamping block + anti-scratch rubber pad + stainless steel locking bolt + guide rail adaptation groove
Surface Treatments: Anodic oxidation (salt spray resistance ≥800h), wear-resistant, anti-fingerprint, and color-stable
Size: Clamping range 3–40mm (adapts to common panel thicknesses), load-bearing 20–50kg per clamp, length 40–80mm, weight 40–100g

Solar mounting hardware standard
Material: 6063-T6 aluminum alloy; tensile strength ≥310MPa, yield strength ≥276MPa, density 2.7g/cm³ (lightweight)
Structure: Double-sided clamping main body + anti-slip rubber pad + stainless steel locking bolt + rail-adaptive base + scale marking
Surface Treatments: Anodic oxidation (salt spray resistance ≥800h), wear-resistant and anti-fingerprint
Size: Clamping range 3–40mm, load-bearing 30–70kg per clamp, length 50–90mm, weight 60–130g

Solar mounting hardware standard
Material: Hot-dip galvanized steel, SS304 stainless steel; tensile strength ≥450MPa, corrosion-resistant for outdoor use
Structure: 360° rotating joint + arc roof-fitting base + anti-slip serrations + reinforced rib + pre-drilled mounting holes
Surface Treatments: Hot-dip galvanizing (salt spray ≥1000h), stainless steel passivation, optional powder coating
Size: Adjustment angle ±20°, thickness 2.5–5mm, load-bearing 70–180kg, fits roof slope 10°–60°

Standard: Complies with IEC 62715, GB/T 30427, ANSI/UL 2703; solar mounting & aluminum profile standard.
Material: Main profile: 6063-T6 aluminum alloy; Fasteners: 304 stainless steel; Tensile strength ≥310MPa, bending strength ≥250MPa
Structure: Modular aluminum profile frame + adjustable connecting joint + triangular reinforcement brace + PV panel clamping interface + foundation connection plate
Surface Treatments: Anodic oxidation (salt spray resistance ≥1000h), optional powder coating (color matching project needs)
Size: Profile section 40×40–100×100mm, frame span 1.2–3m, load-bearing 180–500kg/m², fits 1600–2400mm PV panels

Tile roof solar mounting standard
Material: Hot-dip galvanized steel, SS304 stainless steel; tensile strength ≥450MPa, corrosion-resistant for outdoor use
Structure: Arc tile-fitting base + 2-way adjustable hook + anti-slip serrations + water-proof rubber gasket + pre-drilled holes
Surface Treatments: Hot-dip galvanizing (salt spray ≥1000h), stainless steel passivation, optional color powder coating (matches roof tiles).
Size: Thickness 2.5–4.5mm, adjustment angle ±15°, load-bearing 60–150kg, fits flat/curved tiles (tile thickness 8–25mm)

Sheet metal quick-install fasteners
Material: Carbon steel, stainless steel (304), brass; strength grades 4.8–10.9
Structure: Square outer cage + internal threaded insert + spring clip/claw (for clamping)
Surface treatments: Zinc plating, passivation, black oxide
Size M3–M12 (matches standard bolts), square size 8–20mm

Complies with international standards such as DIN 787, ISO 1876, and ASTM A307
Features a square headand T-shaped shank design, specifically tailored for sliding installation in T-slots
Common materials include carbon steel (e.g., Q235, 45#), stainless steel (e.g., 304, 316), and alloy steel
Strength grades typically range from 4.8 to 8.8

Aluminum profile fastener standard.
Material: Nut body: 6061-T6 aluminum alloy; Spring: 304 stainless steel; Tensile strength ≥300MPa
Structure: Square T-shaped base + spring preload sheet + internal thread hole + anti-slip serrations + channel-adaptive edges
Surface Treatments: Aluminum part: anodic oxidation (salt spray ≥600h); Stainless steel spring: passivation
Size: Thread specification M5–M12, T-base width 10–25mm, adapt to the slot width of aluminum profiles8–20mm, load-bearing 15–50kg

Products